This CCU-100 kit is designed to easily connect several Datavideo products into an effective and professional studio system.
The CCU-100 kit can be used for passing on power to professional video cameras from the Datavideo PD-6* power centre and handling signals sent over the camera cables (CB-43 / 44 / 45 / 49*) to a switcher. In this way, it is used to remotely set up various camera parameters such as iris, shutter, gain, and master pedestal using an MCU-200 (S/P/J)*.
As well as passing on camera control signals, the CCU-100 system simultaneously handles digital SDI and analogue signals for camera video output, Program look back video, camera view finder data as well as tally and intercom signals between the cameras and a video switcher.
The Datavideo AD-2 (S/P/J), Multi Transmission Adaptor Box, is an adaptor box that allows connections between the CCU-100 Camera Control Unit and a single camera position. The CCU-100 and AD-2 (S/P/J) form part of an integrated cabling solution that allows you to get things done fast, easy and within a budget.
||17 Pin Jack x 4
Connect to CB-43/44/45/49 All-in-One Cable (Signal transmission: HD-SDI, MCU Control, Power, Look Back, View Finder, Intercom, and Tally)
||Composite: BNC x 1
For Look Back CV Signal
||HD/SD-SDI: BNC x 4
HD-SDI: SMPTE 292M
SD-SDI: SMPTE 259M
Composite: BNC x 5
For View Finder Signal (QUAD CV Signal x 1/Single CV Signal x 4)
||RJ-45 x 4
Connect to MCU-200 for remote control
XLR 5 Pin x 4
Connect to ITC-100 (Intercom/Tally Signal)
||Power LED x 1
CCU-100 Power Indicator (Power On: Red Color)
Power LED x 4
Power Transmission Indicator (Power On: Red Color)
||XLR 4 Pin male x 4
Transmit 48V from PD-6
||440 x 243.3 x 49mm