Total Video Inputs
The ATEM Camera Control Panel is a compact remote camera control unit designed to control up to four different URSA Broadcast, URSA Mini, Blackmagic Studio or Blackmagic Micro Studio cameras. The control panel features traditional broadcast style controls and adjustments so a single person can monitor and adjust a wide range of technical parameters such as black levels, gain, color balance, shutter speed and more. This leaves your camera operators free to focus on the more creative aspects of live production such as framing and composition. Unlike traditional CCU controllers, which have to be installed into a desk, the ATEM Camera Control Panel has been designed to be portable so it can simply be placed on any desktop or bolted down so it can be mounted in a slide out rack shelf. The controls are arranged in a familiar and logical layout, making it perfect for both experienced and new operators. Plus, it works with all ATEM switcher models!
When working on live multi camera programs, it’s important to make sure all of the cameras are properly balanced and set up correctly so that you get consistent video from every angle. The ATEM Camera Control Panel features 4 camera controllers in one panel. Each camera controller includes a large LCD screen with soft buttons and knobs at the top of the panel, and a full set of professional controls below, on the main body of the panel.
The top section lets you save and recall scene presets so you can quickly adjust cameras based on changes in the scene such as lighting. This section also includes controls for adjusting master gain, white balancing the camera and changing the camera’s shutter speed.
Quickly set and adjust white balance.
Save and recall scene presets.
Boost sensitivity of sensor in low light or when more depth of field is needed.
Set the shutter speed of the camera.
Select to output color bars for the selected camera.
The center section features independent RGB controls for gain and pedestal, or white and black. This allows you to adjust the individual red, green and blue levels in your blacks and whites to compensate for unwanted color.
Independent RGB control for gain/whites.
Adjust the RGB values for pedestal/blacks.
The bottom section features an LED camera number that indicates preview and on air status,along with a high quality professional joystick that’s used to precisely adjust the iris and master black. It also features a call button for talkback with the operator, along with a panel lock button and indicators for the network, power and cable connection to the camera.
Joystick for adjusting iris and master black. Adjust up and down for iris, rotate for master black and push to select camera to monitor.
Sets the limit of the iris control on the joystick.
Locks the iris and master black controls on the joystick to prevent accidental changes.
Controls the degree or level of black/pedestal without affecting contrast.
Lock out the entire panel to prevent accidental changes.
Indicate network connectivity, alarms and cable integrity.
Used for sending the aux feed to the monitor so you don’t have to move the joystick.
LED dot display that indicates camera number and on air/preview status.
Flashes tally light and sends tone to get operator’s attention.
The ATEM Camera Control Panel connects directly to your ATEM live production switcher or ATEM hardware control panel via Ethernet. In many setups, you may be using multiple ATEM products such as an ATEM 4 M/E Broadcast Studio 4K switcher with an ATEM 1 M/E Advanced Panel and the ATEM Camera Control Panel. Ethernet can simply be looped from one ATEM device to another.
The ATEM Camera Control is incredibly fast to use as it features traditional broadcast CCU controls so you get the benefit of years of broadcast experience. You can use the knob on the LCD to set the camera number, which turns red when a camera is on the air. The main joystick control can be moved vertically to adjust the camera iris while the knob can then be rotated to change the master black level. Pressing down on the knob will let you monitor the camera you’re currently controlling via the aux output of the switcher. Simply push the knobs to rapidly switch between cameras to ensure all your cameras match color. The ATEM Camera Control Panel is fast to set up so you can instantly start controlling the cameras that are connected to your switcher!
1.5G, 3G, 6G, 12G
2 x XLR. 2 x RCA.
2 x XLR Program 2 x XLR Monitor.
1 x XLR Timecode in and 1 x XLR Timecode out.
Tri-Sync or Black Burst.
On all 20 inputs.
20 x 10-bit HD/Ultra HD 4K switchable. 2 channel embedded audio.
1 x XLR Timecode and 1 x XLR Talkback.
2 Ch embedded into SDI output on all outputs.
1 x XLR Timecode and 1 x XLR Talkback.
3 x 10-bit HD/Ultra HD 4K switchable.
1 x 10-bit (From Ultra HD 4K to HD).
1 x 10-bit HD/Ultra HD 4K switchable.
2 x SDI.
2 x SDI.
Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
1 x USB 2.0 port.
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p50, 2160p59.94
SMPTE 292M, SMPTE 424M, SMPTE 2082.
REC 601, REC 709, REC 2020.
16 with Chroma/Linear/Luma key.
1 Stinger, 1DVE .
Software or optional hardware panel.
Red for program and green for preview indication.
2 x 10 Views for 20 total views.
Select HD or Ultra HD.
64 with fill and key.
2 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
WAV, MP3 and AIFF.
Minimum monitor resolution of 1366 x 768.
Built in HD LCD monitor for video and 42 LED buttons for Aux switching.
< 7 Lines
24 input x 2 channel mixer.
Level and Peak metering.
Master gain control.
Dedicated analog outputs for monitoring.
Yes, program x 1.
ATEM Software Control Panel included free for macOS 10.12 Sierra, macOS High Sierra 10.13 or later and Windows 8.1 64-bit or Windows 10 64‑bit.
Using USB 2.0 connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
macOS 10.12 Sierra,
macOS High Sierra 10.13 or later.
Windows 8.1 or
2 x Internal 110 - 240 AC.
2 Rack Unit Size.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM 4 M/E Broadcast Studio 4K
SD card with software and manual