The D400-Dante A-Net Distributor from Aviom is a 2RU rackmountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R. D400-Dante includes eight A-Net outputs, designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.
Unlike D400, D400-Dante A-Net Distributor adds connectivity for a Dante digital audio network, allowing up to 32 channels to be sent directly from a Dante audio network to A320 and A360 personal mixers. Any 32 Dante channels may be selected from the Dante network using the Dante Controller software.
The D400-Dante is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400-Dante use RJ45 connectors.
Pro16e A-Net; RJ45 connector, unpowered
Out to Personal Mixers: Eight RJ45 connectors, powered
|Dante Interface||32 channels (44.1/48 kHz)|
|Stereo Linking||Two 8-position DIP switch blocks (1-16, 17-32)|
|Connectors||1 x RJ45 for primary I/O
1 x RJ45 for secondary I/O
|LEDs||Red: Power On
Green: Network sync
Green: Network activity
Yellow: 1 GB active
|Power Supply||Internal, IEC connector|
|Input Voltage||115 or 230 VAC (with selector switch), both +15/-22% @ 220 W maximum; 50 to 60 Hz|
|Output Voltage||For Personal Mixers:
24 VDC, 0.5 A
Transmitted over the Cat-5e cable
|AC Fuses||115 V Range: T2.5AL/250V
230 V Range: T1.25AL/250V
|Dimensions||2RU; 19.0 x 7.4 x 3.5" (48.3 x 18.8 x 8.9 cm)|
|Weight||12.0 lb (5.4 kg)|
|Package Weight||8.4 lb|
|Box Dimensions (LxWxH)||21.7 x 12.0 x 7.7"|