The 6416i Input Module provides 16 balanced line-level analog inputs to a Pro64® digital snake or audio network.
Use the 6416i in a digital snake when sending return signals from a front-of-house console to the stage area to be connected to signal processing and amplifiers. In a digital audio network, the 6416i can be used when line level devices such as CD players, DAWs, computers and preamps need to be connected.
The 2U 6416i can insert up to 16 line-level analog sources into a Pro64 digital snake or audio network system. Audio connected to the 6416i is converted to A-Net digital data and inserted into the Pro64 network. Each channel includes a four-position gain switch with three-segment LED level metering, and individual channel activation switches. Adjacent channels can be linked as a stereo pair. Audio thru connections are provided via DB25 multipin connectors on the rear panel.
Each 6416i can be configured to operate within one of four 16-channel channel/slot ranges within the Pro64 network or assigned to the network's matrix using the Pro64 Network Manager software, making complex installations easy to configure and manage. Each input channel of a 6416i can be made active and inserted into the network as needed.
The Pro64 A-Net network supports three ranges of variable sample rates: 44.1/48kHz±, 96kHz±, and 192kHz±. No matter the sample rate, all 16 input channels on the 6416i are available for use. All audio is streamed at 24-bit resolution with no data compression at any time.
In addition to its audio capabilities, the 6416i also includes the innovative Virtual Data Cables™ for simultaneously distributing up to 14 channels of non-audio control data such as MIDI, RS-232, and GPIO to any device on the Pro64 network. Every Pro64 I/O module comes with its own set of VDC™ ports that can be individually configured.
|Channels||16 inputs||Line level|
|XLR Inputs||Pin 1: Shield; Pin 2: Hot; Pin 3: Cold|
|Audio Thru; Alt. In||DB25 multipin, x2; audio pinout|
|Input Impedance||3k ohms|
|Input Gain Range||+6, 0, -6, -14 (dB); 4-position switch|
|Max. Input Level||+18dBu|
|Sample Rates||1x: 39.7-52kHz;
|Frequency Response||-3dB: 2Hz and 23kHz
±0.5dB: 3Hz?22kHz (at 1x sample rate)
|THD +N||< .002% at -10dBFS|
|Signal to Noise||A/D: -111dB (unweighted)|
|Crosstalk||<100dB at 1kHz|
|Latency||Analog input to analog output: <800µs|
|A-Net||2 EtherCon® RJ45 connectors|
|A-Net Cable Length||400 feet (120 meters) between devices|
|Virtual Data Cables||MIDI In, MIDI Out; 5-pin DIN
DB9 connector; DIP switch configuration
In (x4), Out (x4); terminal block connectors;
DIP switch configuration; TTL or isolated
Internal switching type; IEC connector
|Maximum Ambient Temperature||50°C|
|Dimensions||2U; 19"w x 8"d x 3.5"h (482.6 x 203 x 88 mm)|
|Weight||9 pounds (4.1 kg)|