Auckland  09 414 0477
Wellington  04 801 9494
05314

SPL SMC 7.1 Surround Monitor Controller

SPL SMC 7.1 Surround Monitor Controller
larger imageMove mouse over the image to magnify
NZ $2,527.00
Excl GST
Qty.

Key Features

  • Two Balanced 7.1 Inputs
  • Two Balanced Stereo Inputs
  • Balanced 7.1 Output
  • Balanced Stereo Output with Sub Out
  • Extensive Routing Options
  • Solo in Place / Solo to Center
  • High-Quality Headphone Amplifier
  • Dedicated Analog Meter Output
  • Internal Power Supply
  • Made in Germany
The Surround Monitor Controller SMC 7.1 is an analog studio monitor controller for 7.1 and stereo sources.

Each of the two balanced 7.1 inputs and the two balanced stereo inputs can be routed to the balanced 7.1 output. The L/R signals of the active input can optionally be routed to the alternative stereo output. With the high-quality headphone amplifier, you can listen to the L/R signal of the active input as well as to single channels of the 7.1 inputs.

The eight-ganged potentiometer controls the volume of all channels directly – no control circuits like VCAs are used.

The SMC 7.1 is built up in high-quality analog technique, which ensures a linear frequency response up to 100 kHz as well as an outstanding dynamic range.
Inputs
Sub-D-25-Input
  • Sub-D-25 (TASCAM-Standard)
  • Impedance: 20 kOhms
  • CMR: -82 dB
  • Max. Input level: +22 dB
XLR-Input
  • Neutrik XLR, symmetrisch, Pin 2 = (+)
  • Impedance: 20 kOhms
  • CMR: -82 dB
  • Max. Input level: +22 dB
Output
Sub-D-25-Output
  • Sub-D-25 (TASCAM-Standard)
  • Frequency range: 10 Hz to 150 kHz ( -3 dB)
  • Crosstalk at 1 kHz: -92 dB
  • THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
  • Noise (A-weighted): -93 dB
  • Dynamic range: 115 dB
XLR-Output
  • Neutrik XLR, balanced, Pin 2 = (+)
  • Frequency range: 10 Hz to 150 kHz ( -3 dB)
  • Crosstalk at 1 kHz: -92 dB
  • THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
  • Noise (A-weighted): -93 dB
  • Dynamic range: 115 dB
Headphone Output
  • 6,35 mm TRS connector
  • Pin wiring: Tip = Left, ring = right, sleeve = GND
  • Impedance: 22 kOhms
  • Frequency range: 10 Hz to 80 kHz ( -3 dB)
  • Crosstalk at 1 kHz: -70 dB
  • THD & N: 0,001% (0 dBu, 1 kHz, 40 kOhms load)
  • Noise (A-weighted): -93 dB
  • Dynamic range: 113 dB
Internal operating voltages
  • Analog: +/- 18 V Power supply
  • Mains voltage (switchable): 230 V AC / 50Hz or 115 V AC / 60Hz
  • Fuses: 230 V = T 500 mA; 115 V = T 1 A
  • Power consumption: max 25 VA
Dimensions
  • (WxHxD) 10.95 x 4.6 x 13.1 in (278 x 103 x 333 mm)
  • 9.04 lbs (4.1 kg), unit only
  • 11.02 lbs (5.0 kg), shipping
0dBu = 0.775V. Subject to change without notice.
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw