Auckland  09 414 0477
Wellington  04 801 9494
05666

Lewitt LCT 441 Flex

Lewitt LCT 441 Flex
larger imageMove mouse over the image to magnify
1" multi-pattern studio microphone
NZ $607.83
Excl GST
Qty.
Let us introduce you to the LCT 441 FLEX, our puristic multi-pattern studio microphone. It follows the way paved by the highly acclaimed LCT 440 PURE, putting top-of-the-line technology in a compact housing. Of course, as with any other LEWITT microphone, we had to add that particular twist...Well, you know us already. This 1" true condenser microphone features eight types of directionality to choose from, including three reverse polar patterns that give you higher flexibility and invite to experiment. Comes with shock mount, windscreen, and pop filter.

GO FULL CIRCLE: Our LCT 441 FLEX features a total of 8 polar patterns
LCT 441 FLEX polar patterns - including three reverse polar patterns.

CHANGE YOUR SOUND In multiple ways: A polar pattern affects how much room sound you end up recording. But switching your polar pattern not only changes the directivity but also alters the frequency response, resulting in a different sound coming from the same microphone. You can also control the proximity effect and have it pronounced or reduced according to your application. This can serve as another sound shaping tool.

STAY FLEXIBLE – BE CREATIVE: Use the LCT 441 FLEX to record your vocals, acoustic instruments, guitar amplifiers, drums, percussion, and everything else. Do not hesitate to change your perspective by experimenting with different directivities. Its natural transient response and high dynamic range make sure that nothing will limit your performance on the technical side. Every session with the LCT 441 FLEX will result in vibrant and lively recordings.

READY TO GO 
Shock mount and magnetic pop filter. Reduce unwanted structure-borne noise efficiently using the included shock mount. The magnetic pop filter hides nothing but captures everything but plosives and hisses. It perfectly integrates with the design of this microphone.
Acoustical operating principle pressure gradient transducer, externally polarized
Diaphragm 3 micron gold sputtered Mylar
Transducer Ø 25.4 mm, 1 in
Polar pattern selectable from Omnidirectional to Figure-8
Sensitivity 28 mV / Pa (-31 dBV), cardioid
Signal / noise ratio 83 dB (A)
Equivalent noise level 11 dB (A), cardioid (IEC 61672-1)
Dynamic range of FET mic. Amp. 121 dB (A)
Max. SPL for 0.5 % THD 132 dB, 0 dB pre-attenuation
Pre-attenuation pad -6 dB
-12 dB
-18 dB
Low-cut filter 40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
160 Hz (6 dB/oct)
Input impedance > 120 Meg ohm
Rated load impedance > 1.000 Ω
Supply voltage 48 V +/- 4 V (IEC 61938)
Current consumption 5.5 mA (IEC 61938)
Mic enclosure Zinc die cast
Connector Gold plated 3-pin XLR
Microphone dimensions 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 inch
Microphone net weight 425 g / 14.9  oz
  • Protective case
  • LCT 40 Wx
  • LCT 40 SHx
  • LCT 50 PSx
  • DTP 40 Lb
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw