Auckland  09 414 0477
Wellington  04 801 9494
05764

SPL Crimson 3 - USB Audio Interface + Monitor Controller

SPL Crimson 3 - USB Audio Interface + Monitor Controller
larger imageMove mouse over the image to magnify
NZ $1,340.00
Excl GST
Qty.

Key Features

  • Two Microphone Preamplifiers 
  • Two Instrument Preamplifiers
  • Four Line Inputs
  • Analog Inputs
  • DAW Returns
  • Three Stereo Sources
  • Artist Mode
  • Two Stereo Speakers Sets
  • Digital In
  • Two Headphone Amplifiers
  • Monitor Mix
  • Analogue Volume
Stand-Alone Operation
Crimson can operate without a USB connection too. Everything is fully
functional except for USB, MIDI and SPDIF in/out.
You can use Crimson as your studio preamplifer to monitor your audio sources
and to rehearse and play or sing along with the DAW.

iPad Recording
Crimson has built-in USB Class 2 drivers for hot-plugging and recording
with an iPad. Do note that the original Apple Camera Kit Adapter is required.

USB & AD/DA Features
• USB 2.0 Hi-Speed audio/MIDI system
• USB Class 2.0 compliance (asynchronous mode)
• 6 simultaneous recording channels to the DAW
• 6 simultaneous output channels from the DAW
• 4 high performance AD/DA converters with 115dB S/N
• 24-bit audio processing and up to 192kHz Sample Rate
• Very low jitter due to FMCTM (Fixed-Master-Clock)
• No sample rate conversion or clock recovery for true 1:1 audio
• Super low latency Mac OS X HAL plug-in driver (1ms)
• Super low latency Windows ASIO/WDM driver (1ms)

System Requirements
• Mac OS X, iOS 6 and higher
• Windows XP, Vista, 7, 8

Quick Start
1. Please go to: www.spl.info/crimson
2. Register to access the latest drivers and manual
3. Download and install the Crimson driver
4. Connect your studio equipment to Crimson

Package Contents
• SPL Crimson
• 12V power supply
• Product guide
• Safety instructions
USB cable not included.
Input Sockets
  • Mic Inputs 1, 2: XLR
  • Line Inputs 1, 2: 6.3mm TRS
  • Instrument Input: 6.3mm TS
  • Source 1 Input: 6.3mm TRS
  • Source 2 Input: RCA
  • Source 3 Input: Mini-J

Output Sockets
  • Speaker Out A: XLR
  • Speaker Out B: 6.3mm TRS
  • Headphone Outputs 1 and 2: 6.3mm TRS

Maximum Input Levels
  • Mic Inputs: +14.5dBu (Gain fully left)
  • Line Inputs: +22.5dBu
  • Instrument Input: +24dBu (Gain fully left)
  • Source 1 Input: +22.5dBu
  • Source 2 Input: +22.5dBu
  • Source 3 Input: +22.5dBu

Maximum Output Levels
  • Speaker Output A and B: +22.5dBu

Microphone Preamplifiers (balanced, XLR)
  • Gain Control: +7dB - +60dB
  • Frequency Response: 10Hz - >200kHz
  • Noise (unweighted, 30dB gain, input termination 150Ohm): -90dBu
  • Equivalent Input Noise: -128dBu
  • Common Mode Rejection Ratio: < -70dBu
  • THD+N Ratio@1kHz (30dB gain, input termination 150Ohm): 0.003%
  • High Pass Filter: fg = 80Hz, 6dB/Oct.
  • Phantom Power: 48Volt

Headphone Outputs (stereo, 6.3mm TRS)
  • Frequency Response: 10Hz - >200kHz
  • Power@0dBu: 47Ohm load: 13mW/300Ohm load: 1,7mW/600Ohm load: 1.0mW
  • Power max: 47Ohm load: 670mW/300Ohm load: 265mW/600Ohm load: 150mW
  • THD+N Ratio@1kHz (Power@0dBu): 47Ohm: 0.0026%/300Ohm: 0.002%/600Ohm: 0.002%

Power Supply 
  • External Power Supply, Input 100–240V AC/50–60 Hz; Output 12V DC/1,5A
  • Internal Power Supplies: Audio: +/-17V, Digital: +5V and +3,3V
  • Power Consumption: 16.8 Watt

Dimensions & Weight
  • H x W x D in mm: 67x330x212 cm, 2.64x12.99x8.35 inch
  • 2,8 kg, 6.17lbs
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw