| |
|
|
| TRX900LT |
TRX900LTS |
TRX900 |
| |
|
|
|
 |
|
| |
|
|
- Built-in 2.4 GHz receiver, receives timecode and remote control signals from ZaxNet via the IFB100
- Digital modulation wireless transmitter
- Superb audio quality that rivals a mic cable
- 96 hour internal backup recording with timecode stamp
- Digital drop-out protection
- 5 hour run time on a single AA lithium battery
- Graphic LCD display
- Small, rugged and lightweight
- No inter-modulation - up to 50 transmitters, in the same frequency block, can be used together
|
- Two studio quality internal microphone preamps
- Built-in 2.4 GHz receiver, receives timecode and remote control signals from ZaxNet via the IFB100
- Two channel digital modulation wireless transmitter
- Compander free superb audio quality that rivals a mic cable
- Two channel 96 hour internal backup recording with timecode stamp
- Internal SMTPE timecode reader / generator
- Digital drop-out protection
- Up to 5 hours of run time on a single AA lithium battery
- Graphic LCD display
- Talent friendly small, rugged and lightweight nylon composite case
- No heat generation from bodypack
- Two channels per RF carrier with no inter-modulation - up to 50 transmitters, in the same frequency block, can be used together
|
- Fully encrypted audio transmission
- Built-in 2.4 GHz receiver to receive timecode and remote control signals from ZaxNet and/or IFB100
- Digital modulation wireless transmitter
- Superb audio quality that rivals a mic cable
- Digital drop-out protection
- 5 hour run time on single CR123 battery
- Graphic LCD display
- Integrated timecode reception
- Small and lightweight
- No inter-modulation - up to 50 transmitters, in the same frequency block, can be used together.
|
| TRX800 |
TRX942 |
TRX900AA |
| |
|
|
 |
 |
 |
| |
|
|
- Fully encrypted audio transmission
- Digital modulation wireless transmitter
- Superb audio quality that rivals a mic cable
- 106 dB dynamic range
- Digital drop-out protection
- 5 hour run time on a single CR123 battery
- Graphic LCD display
- No inter-modulation - up to 50 transmitters, in the same frequency block, can be used together.
|
- Built-in 2.4 GHz receiver, receives IFB audio, timecode and remote control signals from ZaxNet via an IFB100
- 100% digital modulation wireless transmitter
- Superb audio quality that rivals a hard-wired microphone
- Analog dynamic range of 106 dB
- Digital dynamic range of 124 dB
- Balanced XLR input with 48 V phantom power
- 96 hour internal recording with timecode
- Digital drop-out protection
- Mic / line level input
- User selectable 10, 25, 50 or 100* mW output power
- ZPX rechargeable power system with up to 6 hour run time
- Graphic LCD display
- Internal timecode reader / generator
- RF remote controllable with IFB100 Transmitter
- Internal headphone monitor mixer
- 100% machined aluminum case
- No inter-modulation - up to 50 transmitters, in the same frequency block, can be used together.
|
- Fully encrypted audio transmission
- Built-in 2.4 GHz receiver to receive timecode and remote control signals from ZaxNet and/or IFB100
- Digital modulation wireless transmitter
- Superb audio quality that rivals a mic cable
- Digital drop-out protection
- 6 to 8 hour run time on two AA batteries
- Graphic LCD display
- Integrated timecode reception
- Small and lightweight
- No inter-modulation - up to 50 transmitters, in the same frequency block, can be used together.
|
| Recievers |
| |
|
|
| RX900M |
RX900S |
RX4900 |
| |
|
|
 |
|
 |
| |
|
|
| The RX900M (mono) ENG Receiver is compatible with the TRX900, TRX900AA and all other mono Zaxcom Digital Wireless transmitters. It has a low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply. |
The RX900S (stereo) ENG Receiver is compatible with the TRX900, TRX900AA, TRX992 and all other Zaxcom Digital Wireless transmitters. It has a low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply. |
The RX4900 is a single rack unit containing four stereo receivers. It has the capability of receiving eight channels of audio while used with stereo transmitters. The RX4900 provides all necessary power and antenna distribution internally for each of its four receivers. The antenna inputs of the RX4900 have a complimentary loop output so multiple RX4900's can be connected to a single antenna system. |
| QRX100 |
|
|
| |
|
|
 |
|
|
| |
|
|
The QRX100 RF, audio and timecode receiver is a quantum leap in wireless transmission both to and from the video camera. It can receive up to four channels of 100% digital audio from up to two Zaxcom stereo transmitters to take full advantage of the four discreet audio channels available in most of today’s video cameras. With add-on features to suit your needs and budget, QRX100 provides unprecedented flexibility in a broadcast ENG receiver.
- Four channel UHF diversity audio receiver
- Built-in IFB return channel transmitter / receiver
- SMPTE timecode reader/generator
- Four channel side mounted LED meters (Pat. Pend.
|
|
|
| IFB |
| |
|
|
| IFB100 |
ERX Series |
|
| |
|
|
 |
 |
|
| |
|
|
he IFB100 transmits IFB audio, timecode and remote control signals to the TRX900 series digital wireless transceivers on a single RF carrier using a 2.4 GHz signal. It can be used license-free in almost every country.
The IFB100 can be used in an array of applications - on your sound cart, in a studio or on the side of your video camera. The left side has dedicated connectors for: two audio inputs, timecode in/out and power in. The front has a graphic LCD screen indicating the transmitter status and timecode display.
IFB audio is accepted from a balanced audio connector at line-level. The built-in 2-channel audio mixer can combine two separate channels of audio onto the mono digital transmission of the IFB100.
The timecode reader / generator runs at all common frame-rates and directly accepts SMPTE timecode from an external source. It can continuously jam external timecode or free run.
As a timecode and remote control transmitter, the IFB100 is compatible with both the TRX series digital wireless and the ZFR100 flash recorder. Settings such as body pack audio gain and RF frequency are adjustable - even while the transmitter is in use.
The IFB100 transmitter makes it easy to have a virtual multi-track recording. It’s easily achieved by sending timecode to multiple TRX’s or ZFR’s at the same time – their recordings all have the same timecode that easily matches up in Post. (Pat Pend)
The RF power output is 100 mW. IFB audio has a range of approximately 150 feet, timecode and remote control commands have a range of approximately 500 feet. |
The new ERX1 & ERX1TCD Encrypted IFB bodypacks receive high quality digital audio, timecode and metadata from a Zaxcom IFB transmitter. They have an LCD display for showing timecode and current Scene and Take metadata in realtime with a hold button for script supervisors.
The ERX1TCD has a built-in timecode reader/generator and output to continuously jam digital slates ensuring no timecode drift between Deva/Fusion and the slate. The timecode will stay accurate even in the case of an extended RF dropout. It will also communicate the Scene and Take metadata to ZaxNet compatible digital slates for display when the clapper is activated.
The ERX1TCD also has the ability to delay the received audio signal by up to 300ms or 10 video frames. This is used to provide a personal audio delay to match the viewing of your scene on different monitors or cameras that can have different video delays due to video signal processing. When used with ZaxNet the delay can be set differently between live recording and playback modes.
The ERX1 and ERX1TCD contain a 1 kHz notch filter to eliminate the transmission of tone that is sometimes sent from the mixing console. The notch filter frequency is adjustable and using the notch filter won’t affect the quality of the IFB audio.
The ERX1 and ERX1TCD are compatible with the IFB100 2.4 GHz transmitter. |
|
| Recorder Mixers |
| |
|
|
| Nomad |
Fusion 12 |
Fusion 10 |
| |
|
|
 |
 |
|
| |
|
|
| Nomad is a complete location sound recording solution for film and television prouctions. Specifially designed for over the shoulder use, it provides all the functionality necessary to mix, record and monitor audio in a power efficient space-saving package. Nomad seamlessly integrates with Zaxcom Digital Wilress, IFB and ERX systems to provide unique functionality in the sound bag. |
The Zaxcom Fusion is a high-resolution 16 channel audio mixer / 12 track recorder for reality television, surround recording and ENG.
- Touch Screen Interface
- Analog Inputs
- Analog Input Limiter
- Digital Inputs
- Mixing
- Recording
- Camera / Stereo RF Link Connection
- Metering
- Firewire PortRF
- Interference Protection
- Timecode
- Input Sample Rate Conversion
|
The Zaxcom Fusion is a high-resolution 16 channel audio mixer / 10 track recorder for reality television, surround recording and ENG.
- Touch Screen Interface
- Analog Inputs
- Analog Input Limiter
- Digital Inputs
- Mixing
- Recording
- Camera / Stereo RF LinkConnection
- Metering
- Firewire Port
- RF Interference Protection
- Timecode
- Input Sample Rate Conversion
|
| DEVA 16 |
DEVA 5.8 |
DEVA V |
| |
|
|
 |
 |
 |
| |
|
|
The Deva 16 is a 16-track hard disk recorder for film and television production. With 8 hardware faders and a built-in hard drive, DVD-RAM and Flash memory slot, the Deva 16 is a complete solution for recording, mixing and effects in one package.
- 16-track recording on built-in hard disk, DVD-RAM or flash media
- 8 hardware faders
- 12 analog inputs - 8 mic/line + 4 line balanced with 48V phantom power
- 8 digital inputs
- 8 digital direct outputs
- Built-in 16-channel mixer
- EQ, notch filter, compressor and delay on each channel
- Mix to disk or outputs pre or post fader
- Record to external Firewire drive w/ no additional computers
- Full metadata entry using the Deva touchscreen
- Intuitive integrated color touchscreen interface
|
The Deva 5.8 is a 10-track hard disk recorder for film and television production. With 8 hardware faders and a built-in hard drive, DVD-RAM and Flash memory slot, the Deva 5.8 is a complete solution for recording, mixing and effects in one package.
- 10-track recording on built-in hard disk, DVD-RAM or flash media
- 8 hardware faders
- 8 analog mic/line inputs with 48V phantom power
- 8 digital inputs
- 8 digital direct outputs
- Built-in 16-channel mixer
- EQ, notch filter, compressor and delay on each channel
- Mix to disk or outputs pre or post fader
- Record to external Firewire drive w/ no additional computers
- Full metadata entry using the Deva touchscreen
- Intuitive integrated color touchscreen interface
|
In 1996, Zaxcom introduced the world’s first portable production hard disk recorder. Since then, the Academy Award winning Deva recorder has transformed the process of audio recording for motion picture, sound effects and television production forever.
Deva V – 10-track recorder, max sample rate 192 kHz, Soundfield™ decoder. |
| |
|
|
| DEVA IV |
|
|
| |
|
|
|
|
|
| |
|
|
In 1996, Zaxcom introduced the world’s first portable production hard disk recorder. Since then, the Academy Award winning Deva recorder has transformed the process of audio recording for motion picture, sound effects and television production forever.
Deva IV – 8-track recorder, max sample rate 96 kHz. |
|
|
| Miniature Recorders |
| |
|
|
| ZFR100 |
ZFR200 |
|
| |
|
|
 |
 |
|
The Zaxcom ZFR100 is a timecode referenced audio recorder. The belt-pack style ZFR100 can be used in a sound bag, as a body worn recorder or any other application that requires a timecode referenced audio recording.
- Fault tolerant recording
- Removable MiniSD media
- Built-in timecode reader / generator
- Small size & rugged design
|
The ZFR200 is an ultra-compact and lightweight timecode referenced audio recorder.
The ZFR200 records on microSD cards and has a built-in SMPTE timecode reader / generator. The unit can receive timecode via a manual jam, the IFB100 or the ZaxNet 2.4 GHz wireless network.
- Fault tolerant recording
- Removable microSD recording media
- Records 96 hours of uncompressed audio using a 16 GB memory card
- Built-in timecode reader / generator
- Built-in RF receiver for remote timecode synchronization and reception of remote control commands from IFB100
- Small size & rugged design
- Graphic backlit LCD display
|
|
| Control Surfaces |
| |
|
|
| Deva Mix-8 |
Deva Mix 12 |
|
 |
 |
|
The Deva Mix-8 from Zaxcom is a control surface for the embedded digital audio mixer of the Fusion, Fusion 12, Deva IV, V, 5.8 or 16 location audio mixer / recorders.
- Easily controls fader levels
- Control of input trims
- True digital mixing console
- Zero time offset design for no phase distortion channel to channel
- No audio cabling from Mix-8 to recorder
- Floating point DSP digital mixing with no internal clipping or quantization issues
- Unlimited routing
- No sample rate issues between Mix-8 and recorder
- Cross points can be pre or post fader with or without phase inversion
|
The Deva Mix-12 from Zaxcom is a new concept in location mixing. It is a control surface for the embedded digital audio mixer of either the Deva IV or V location recorders.
- True digital mixing console
- 3-band shelving EQ with 2 notch filters and high pass per channel
- Soft knee compressor with makeup gain
- All cross points are cross faded (never any clicks or pops)
- Zero time offset design for no phase distortion channel to channel
- No audio cabling from mixer to recorder
- Floating point DSP (no internal clipping or quantization issues)
- Unlimited routing
- No sample rate issues between mixer and recorder
- Integrated Deva record & stop buttons
- QWERTY keyboard for metadata input
- Cross points can be pre or post fader with phase inversion
|
|
