Auckland  09 414 0477
Wellington  04 801 9494
62903

Hear Technologies Hear Back Four Pack

Hear Technologies Hear Back Four Pack
larger imageMove mouse over the image to magnify
8-Channel Personal Monitor Mixer System that includes 4 Mixers, 1 Hub, 4 - 50 foot CAT5e cables, and a Hear Back analog DA-88 style cable.
NZ $3,422.00
Excl GST
Qty.

Key Features

  • Local control of 8 audio channels (stereo mix and six “more-me’s”)
  • ADAT, analog, HearBus inputs are switch-selectable from Hub front panel
  • Built-in DSP Limiter with threshold adjustment
  • Master Volume
  • Stereo AUX In
  • Balanced Line-Outputs
  • Built-in Mic Stand Mount
  • Standard CAT5e power
Tired of someone else controlling your mix? What if you could control it yourself? Hear Technologies has designed a new personal monitoring system called the Hear Back. It changes the way monitor mixing is accomplished on stage or auditorium; as well as, in the studio. Imagine getting your mix exactly the way you want it. With the Hear Back, you save time and get the sound just right, the first time. This affordable system is perfect for headphones, wired and wireless in-ear monitors, and/or conventional floor monitors.

The Hear Back System: Hub & Mixers
A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5e cables. A single Hub supplies signal and power to a maximum of eight Mixers. If that’s not enough, the Hubs can be daisy-chained using the HearBus In/Out for virtually unlimited system size. The Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers.

For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet.

Our solution, Hear Back, has several key advantages:
  • Virtually unlimited system size
  • Very attractive pricing
  • Excellent audio fidelity
  • Built-in DSP Limiter
  • Very long digital lines possible without loss of audio quality
  • Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel
  • Local control of up to ten channels of audio (8 inputs plus a stereo Aux input). Master Volume controls the level to the headphones, line outs and the Aux input to the line outputs
  • Built-in DSP limiter - designed as a “brick wall” limiter for hearing protection and to protect monitor wedges from overload
  • Headphone amplifier fault indicator - in case of over temperature, or a short, the red LED comes on to alert the user of a problem
  • Bus Status Indicator - confirms proper connection to the Hub
  • Link Indicators - whenever two pairs of mono inputs are linked for stereo operation, the link LED is illuminated
  • Standard CAT5e power and signal connection - a cost effective, simple, nonobtrusive way to connect eight channels of audio. The cable is held in place with a built-in cable strain relief.
  • Balanced Line-Outs, Mono/Stereo
  • Stereo AUX In
  • Mixer has a built-in mic stand mount and may be mounted to a standard mic stand or clipped onto a stand extension bar or clip
  • High Power - Low Distortion headphone amplifiers
Aux Input  
Input Configuration/Impedance: Stereo, unbalanced, 10 Kohms typical
Input Level: +4 dBu optimal, +22 dBu max
Head Phone Power  
Load Impedance:
THD less than 0.01%*
THD less than 0.1%
8 Ohms:
150 mW*
230 mW
 
*THD AT 8 Ohms = 0.015% typical
 
16 Ohms:
235 mW
500 mW
25 Ohms:
675 mW
775 mW
32 Ohms:
950 mW
1.1 W
50 Ohms:
1.6 W
1.8 W
100 Ohms:
1.14 W
1.25 W
200 Ohms:
500 mW
650 mW
600 Ohms:
215 mW
220 mW
IMD: Typically less than 0.03%
Line Out  
Freq Response: 20 Hz to 20 KHz, +0.04 dB, -0.55 dB
THD+N: 0.008% typical at 1 KHz, +15 dBu,
  0.02% typical, 20 Hz – 20 KHz, +4 dBu
IMD: 0.02% typical at +4 dBu, 60 Hz/7 KHz
Crosstalk: Better than -85 dB @ 1 KHz
Propagation Delay: Less than 1.5 mSec, Hub input to mixer output using
500' of cable
Noise Performance  
Noise, A-Weighted: -91 dBu analog, -97 dBu optical
Dynamic Range: 112 dB typical
System I/O  
Hub Line In, Analog: 8 Balanced inputs on DB-25 female (Tascam DA-88 pinout)
Maximum Input Level, Analog: +15 dBu
Hub Light Pipe In: Industry standard fiber optic connector, shuttered
Hub HearBus In, Out: 8-pin RJ45 jack (2 each)
Mixer Headphone Out: TRS 1/4" unbalanced stereo (2 each)
Mixer Line Out: TRS 1/4" balanced (2 each)
Maximum Output Level, Analog: +24 dBu (mixed output)
Aux Input: TRS 1/8" unbalanced stereo
Physical, Mixer  
Size: 11.5" (29.2 cm) H x 5.2" (13.2 cm) W x 3.6" (9.15 cm) D
Unit Weight:  1.2 lb. (0.54 kg)
Mounting: Standard mic stand or desk mounted
Physical, Hub  
Size: 1.75" H x 19" W x 7.125" D
Unit Weight:  5.0 lb.
Mounting: Standard rack mount, 1 RU
0 dBu = 0.775 Vrms
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw