Auckland  09 414 0477
Wellington  04 801 9494
02436

Aviom 6416o v.2

Aviom 6416o v.2
larger imageMove mouse over the image to magnify
WAS NZ $7,751.00 NZ $7,197.00 Save NZ $554.00 Excl GST
Qty.

Product Highlights

  • Four output levels (+24dBu, +18dBu, +4dBu, and mic)
  • 16 balanced mic- or line-level analog outputs (XLR)
  • DB25 alternate audio outputs
  • Three-segment level meter per channel
  • Variable sample rates: 44.1kHz± to 192kHz±
  • 24-bit D/A converters

The 6416o v.2 Output Module provides 16 balanced mic- or line-level analog outputs from a Pro64® network. Use it anywhere that analog outputs are required in a system: on stage or at front of house in a digital snake, in the studio, or in an audio distribution network, making it ideal for live sound reinforcement, broadcast, and other audio distribution applications.

Adding a digital split to a Pro64 system is as simple as connecting an additional 6416o v.2 Output Module with a Cat-5e cable. And there's no limit to the number of splits that a Pro64 network can support.

The 6416o v.2 Output Module is designed to simplify connectivity with amplifiers, powered speaker systems, mixing consoles, and recording devices, thereby increasing the flexibility of Aviom's high-fidelity digital audio networking solution. The 6416o v.2 can be used anywhere that analog outputs are required in a system and can be connected to the entire range of Pro64 products.

 

Four Output Level Options

The 6416o v.2 provides 16 balanced XLR mic- or line-level analog outputs from a Pro64® A-Net network. Each channel includes a four-position output level switch (+24dBu, +18dBu, +4dBu, and mic) and three-segment level metering. Alternate audio outputs are provided via DB25 multipin connectors on the rear panel.

Each 6416o v.2 can be configured fromit front panel to operate within a specified 16-channel Slot range within the Pro64 network, making complex installations easy to configure and manage. In addition, the 6416o v.2 can be programmed using the free Pro64 Network Manager software which allows any network Slot to be assigned to any of the 6416o v.2 analog outputs by using the software's built-in matrix capabilities.

 

Connectivity Options

In addition to its audio capabilities, the 6416o v.2 also includes the innovative Virtual Data Cables for simultaneously distributing up to 14 channels of non-audio control data such as MIDI, RS-232, and GPIO to any device on the Pro64 network. Every Pro64 I/O module comes with its own set of VDC ports that can be individually configured.

The 6416o v.2 is fully compatible with all Pro64 devices, including the dual output level 6416o. Any combination of 6416o and 6416o v.2 modules can be used in a system as the needs of the application dictate.

Channels 16 outputs Mic or line level
XLR Outputs Pin 1: Shield; Pin 2: Hot; Pin 3: Cold
Impedance balanced for Mic, +4dBu, and +18dBu,
Signal on hot only;
full differential on +24dBu;
Alternate Audio Outputs DB25 multipin; audio pinout
Output Impedance 450 Ohms for +18dBu and +24dBu outputs;
200 Ohms for +4dBu and Mic
Output Levels +24dBu, +18dBu, +4dBu, and mic; 4-position switch
Sample Rates 1x: 39.7-52kHz;
2x: 79.4-104kHz;
4x: 158.8-208kHz
24-bit resolution
Frequency Response -3dB: 2Hz and 23kHz
±0.5dB: 10Hz-22kHz (at 1x sample rate)
THD+N < .002% at -10dBFS
Signal to Noise D/A: -111dB (unweighted)
Crosstalk <100dB at 1kHz
Maximum Ambient Temperature 50°c
Virtual Data Cables MIDI In, MIDI Out
5-pin DIN
RS-232
DB9 connector; DIP switch configuration
GPIO
In (x4), Out (x4); terminal block connectors;
DIP switch configuration; TTL or isolated
A-Net 2 EtherCon® RJ45 connectors
A-Net Cable Length 400 feet (120 meters) between devices
Latency Analog input to analog output: <800µs
Power Supply 100-240VAC
Internal switching type; IEC connector
50-60Hz, 24W
Dimensions 2U: 19"w x 8"d x 3.5"h (482.6 x 203 x 88 mm)
Weight 9 pounds (4.1 kg)
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw