Auckland  09 414 0477
Wellington  04 801 9494
02422

Aviom AV-M8

Aviom AV-M8
larger imageMove mouse over the image to magnify
WAS NZ $2,230.00 NZ $2,071.00 Save NZ $159.00 Excl GST
Qty.

Product Highlights

  • Converts eight analog audio channels to a Pro16® A-Net digital stream
  • ADAT® In and ADAT Out for cascading two AV-M8 modules
  • Gain, +48V phantom power, and low cut filter controls per channel
  • 20dB switchable pad (Channels 1 and 2 only)
  • Reversible mounting flanges and rack ears included

The AV-M8 Mic Input Module is an installation-style product that provides eight mic-level inputs via latching 5mm Euroblock connectors to a Pro16® system. Two of its channels also include a 20dB switchable pad for use with line-level input sources. A second group of eight channels of digital audio may also be input to the same A-Net stream by cascading a second AV-M8 module via the built-in ADAT® I/O connections.

The AV-M8 is compatible with all Pro16 Series products including Personal Mixers, A-Net distributors, and output modules. The unit may be mounted in a rack using the detachable rack ears or directly to a table or podium using the reversible mounting flanges.

The versatile AV-M8 Mic Input Module is an eight-input mic preamp for Pro16® systems. Two of its channels also include a 20dB switchable pad for use with line-level input sources such as a computer or CD player. Eight channels of digital audio may also be input to the same A-Net digital stream from a second AV-M8 module suing the built-in ADAT® connections. For permanent installations in conference rooms or other settings, the unit may be mounted in a rack or directly to a table or podium, using the detachable rack ears or reversible mounting flanges.

 

Input Connections

Analog audio is input via eight latching 5.0mm Euroblock connectors. Each analog input channel features configuration DIP switches for the individually selectable gain settings, +48V phantom power, and a low cut filter.

Analog input channels from the AV-M8 are routed to Channels 1-8 in the A-Net® stream, while channels input via the ADAT link from a second AV-M8 become A-Net Channels 9-16. Stereo linking for all eight A-Net channel pairs is supported through an eight-position rear-panel DIP switch.

 

Network Connections

A-Net connections include A-Net Out and A-Net Expansion, using locking Neutrik EtherCon connectors. The A-Net Expansion jack allows up to 32 channels to be carried on a single Cat-5e cable, in either 32x0 or 16x16 configurations. Larger systems (up to 64 channels on a cable) can be built using Aviom's AN-16SBR System Bridge. Pro16 A-Net supports Cat-5e cable runs up to 500ft/150m between devices.
Analog Audio Inputs 6 mic-level, 2 balanced line- or mic-level
8 female Euroblock connectors, 5.0mm, panel-mount
Screw terminals: Audio +; Audio -; Ground
8 male Euroblock connectors supplied in box
A/D Conversion 48kHz, 24-bit
Gain Settings +16dB to +64dB (10 settings)
6-position DIP switch, per channel
Max. Input Level Mic: -2dBu; Line: +18dBu
Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
ADAT® 1 ADAT In, 48kHz, 8 channels routed to A- Net Out, Channels 9-16
1 ADAT Out, 48kHz, 8 channels routed from analog inputs
Input Impedance Channels 1-2, without pad: 2.48k ohms
Channels 1-2, with pad: 5.63 ohms
Channels 3-8: 2.68k ohms
Freq. Response 4Hz-22kHz +0.2dB/- 3db
THD +N < 0.003%
Crosstalk -90dB
Signal to Noise
(unweighted)
A/D: -105dB
Low Cut Filter - 3dB @ 85Hz, -18dB per octave
Phantom Power +48 volts, per channel
Pad 20dB, switchable, Channels 1 and 2 only
Mic Input EIN (Equivalent Input Noise): -128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
CMRR (Common Mode Rejection Ratio): 80dB @ 120Hz (Gain = +60dB)
Bit Error Rate (BER) 10-12
Pro16® A-Net® Out: 1; Expansion: 1; EtherCon® connectors
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable
Uses unshielded Cat-5e UTP (or better) cable
Latency <0.880 msec (measured from analog input to analog output)
Power Supply Internal, universal switching type; IEC jack
Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
Dimensions 19 in. (482.6 mm) wide x 9.25 in. (243.9 mm) deep; 1U high
Weight 8 lb (3.63 kg)
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw