Auckland  09 414 0477
Wellington  04 801 9494
04779

FabFilter Total Bundle

FabFilter Total Bundle
larger imageMove mouse over the image to magnify
The Total Bundle is a set of all FabFilter plug-ins. With this bundle, you get our professional EQ, reverb, compressor, multiband dynamics, limiter, de-esser and gate/expander, creative multiband distortion, delay, filter and synthesizer plug-ins.
Enquire
Pro-Q 2 Equalizer Plug-In
FabFilter Pro-Q 2 is a top-quality EQ plug-in with perfect analog modeling, linear phase processing and a gorgeous interface with unrivalled ease of use.
  • Highest possible sound quality
  • Gorgeous Retina interface with large interactive EQ display, multi-band selection and editing for maximum ease and efficiency
  • Different interface sizes and additional Full Screen mode NEW
  • Up to 24 EQ bands
  • Operates in zero latency mode, linear phase mode with adjustable latency or the unique Natural Phase mode NEW
  • Spectrum Grab: just grab and adjust a peak in the real-time spectrum analyzer right away! NEW
  • Filter shapes: Bell, Notch, High/Low Shelf, High/Low Cut, Band Pass, Tilt Shelf NEW
  • Universal filter slope support for all filter types, up to 96 dB/oct NEW
  • Intelligent solo mode makes it easy to find problem frequencies and hear the effect of a band
  • EQ Match feature to automatically match the spectrum of another track via the side-chain input NEW
  • Each band can operate on the stereo signals or on the left or right channels independently for per-channel EQ-ing
  • Phase Invert option to change polarity NEW
  • Highly improved CPU optimization: Pro-Q 2 uses less memory and is more than twice as efficient as its predecessor! NEW
  • Mid/side mode where you can EQ the mid and side signals separately
  • Optional Gain-Q interaction NEW
  • Auto Gain and Gain Scale NEW
  • Built-in spectrum analyzer with Pre-EQ, Post-EQ and SC modes, adjustable range, speed, resolution, tilt and freeze NEW
  • GPU-powered graphics acceleration
  • Optional piano roll display to quantize EQ frequencies to musical notes NEW
  • Double-click text entry of parameter values
  • Different display ranges: 3 dB and 6 dB ranges for mastering, 12 dB and 30 dB for mixing
  • Large output level meter with peak level readout NEW
  • Stereo and mono plug-ins available
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Extensive help file with interactive help hints
Pro-R Reverb Plug-In
FabFilter Pro-R is a high-end reverb plug-in with natural sound, musical controls, and innovations like the unique Decay Rate EQ to shape the reverb's character.
  • Beautifully designed room models, ranging from small ambiences and rooms to large concert halls and huge cathedrals.
  • Carefully developed to easily fit in the mix, without causing undesirable coloration, density or phase problems.
  • Gorgeous Retina interface with large interactive reverb display featuring Decay Rate EQ and Post EQcurves.
  • Very easy to set up, with user-friendly, non-technical controls.
  • Stepless Space control, which smartly and smoothly combines the room model and decay time of the reverb. You can choose from over a dozen carefully designed room models and seamlessly vary between them, without hearing clicks or unwanted artifacts.
  • Decay Rate control, changing the overall decay time from 50% to 200% of the current Space setting.
  • Intelligent Stereo Width control, ranging from pure mono to true stereo and beyond.
  • Distance control to adjust the proximity to the sound source in the selected space.
  • The Character control changes the sound from a clean, transparent decay, to a lively reverb with pronounced reflections and echoes, all the way to an over-modulated chorus-like effect.
  • Perfectly tuned Brightness knob, affecting not only overall brightness, but also the decay of high frequencies.
  • Mix knob with a Lock Mix option, which prevents preset loading from overriding the current mix setting.
  • Predelay control via the bottom bar, ranging from 0 to 500 ms, with optional host tempo sync.
  • Innovative six-band Decay Rate EQ, giving you full control over the decay rate at different frequencies.
  • Six-band Post EQ to equalize the final reverb sound. Together with the Decay Rate EQ, this lets you design reverbs of any style or character.
  • Real-time spectrum analyzer that also visualizes the decay time at different frequencies.
  • Full Screen mode, offering a large analyzer display and Decay Rate EQ and Post EQ controller.
  • Multiple interface sizes: Medium, Large and Extra Large.
  • Stereo and mono plug-ins available.
  • Supports common Pro Tools hardware control surfaces.
  • MIDI Learn.
  • Undo/redo and A/B comparison.
  • Smart Parameter Interpolation.
  • Sample-accurate automation of all parameters.
  • Extensive help file with interactive help hints.
Pro-C 2 Compressor Plug-In
FabFilter Pro-C 2 is a professional compressor plug-in with versatile side chain and routing options, high-quality sound and an innovative interface.
  • Eight different compression styles, of which five are new in version 2: Vocal, Mastering, Bus, Punch and Pumping NEW
  • Gorgeous Retina interface, with (optional) animated level knee displays and accurate peak/loudness metering NEW
  • Side-chain EQ section, with customizable HP and LP filters, plus an additional freely adjustable filter NEW
  • Program-dependent attack and release curves
  • Smooth lookahead (up to 20 ms), which can be enabled/disabled to ensure zero latency processing NEW
  • Intelligent Auto Gain
  • Hold (up to 500 ms) NEW
  • Custom knee, variable from hard knee to a 72 dB soft knee (to enable saturation-like effects) NEW
  • Auto Release
  • Super-fast attack times
  • Up to 4x oversampling NEW
  • Variable stereo linking and mid/side processing, with mid-only, side-only, M > S and S > M processing.
  • Audition Triggering option, which enables users to hear on which parts of the audio Pro-C 2 is triggering and how much compression is taking place NEW
  • Multiple interface sizes: Small, Medium and Large NEW
  • Range setting, which limits the maximum applied gain change NEW
  • Mix setting, which scales the gain change from 0% to 200% NEW
  • Full Screen mode, offering a large level display and side-chain EQ controller NEW
  • Accurate, large level and gain change meters, with peak and loudness level visualization. The loudness level complies with the Momentary mode of the EBU R128 / ITU-R 1770 standards NEW
  • Retina support on OS X and High DPI support on Windows NEW
  • External side chain triggering
  • GPU-powered graphics acceleration
  • Stereo and mono plug-ins available
  • Optional MIDI triggering NEW
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Extensive help file with interactive help hints
Pro-L Limiter Pug-In
FabFilter Pro-L is a feature-packed limiter plug-in for mastering and mixing, with multiple advanced limiting algorithms and very accurate metering.
  • Great transparent sound combined with maximum loudness
  • Four different limiting algorithms, all with their own character
  • Low CPU usage
  • Highly accurate output and gain reduction metering
  • Adjustable meter scale, including K-System support
  • Unique, highly informative real-time level display
  • Optional Compact interface layout
  • Adjustable look-ahead, attack and release settings
  • Separate channel linking for both the transient and release stages
  • Up to four times linear-phase oversampling
  • Advanced dithering with three different noise shaping algorithms
  • Inter-sample peak detection
  • GPU-powered graphics acceleration
  • Double-click text entry of parameter values
  • Stereo and mono plug-ins available
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Extensive help file with interactive help hints
Pro-MB Multiband Compressor
FabFilter Pro-MB is a powerful multiband compressor/expander plug-in with all the expert features you need, combining exceptional sound quality with great interface workflow.
  • Up to six processing bands, freely placed anywhere in the spectrum
  • Bands can be easily snapped together to form a traditional crossover system
  • Unique Dynamic Phase processing mode featuring zero latency, no static phase changes and no pre-ringing artifacts
  • Excellent Linear Phase processing mode, eliminating audible artifacts when quickly changing crossover frequencies
  • Minimum Phase processing mode
  • Handles any form of dynamics processing, from highly transparent compression, limiting and expansion to pumping upward compression and punchy gating
  • Fully customizable per band: threshold, range, attack, release, output gain, ratio, variable knee, lookahead (up to 20 ms), variable stereo linking, mid- or side-only processing, external side chain input, triggering on a separate frequency range
  • Steepness of each crossover slope can be freely adjusted between 6 dB/oct and 48 dB/oct
  • Intelligent, highly program- and frequency-dependent attack and release curves
  • Global dry/wet mix from 0% to 200% to easily scale the total effect of the plug-in
  • Beautiful Retina interface with unique interactive multiband display, designed for an optimal workflow
  • Accurate and smooth real-time frequency analyzer with pre- and post-processing options and 'freeze' feature
  • High-quality audio processing algorithms with 64-bit internal processing where needed
  • Up to four times linear-phase oversampling
  • Band solo/mute and bypass options
  • Precise output metering
  • GPU-powered graphics acceleration
  • Double-click text entry of parameter values
  • Stereo and mono plug-ins available
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Extensive help file with interactive help hints
Pro-DS De-Esser Plug-In
FabFilter Pro-DS is a highly intelligent and transparent de-essing plug-in, perfect for processing single vocal tracks as well as entire mixes.
  • Highly intelligent 'Single Vocal' detection, and classic 'Allround' detection
  • Transparent program-dependent compression/limiting
  • Adjustable Threshold, Range and detection HP and LP filtering settings
  • Wide Band or linear-phase Split Band processing
  • Optional look-ahead time up to 15 ms
  • Freely adjustable stereo linking
  • Optional mid-only or side-only processing
  • Up to four times linear-phase oversampling
  • Real-time de-essing display, clearly showing the affected parts of processed audio
  • Side-chain input meter, making it easy to choose a good Threshold value
  • Real-time spectrum analyzer built into the HP/LP filter controller
  • GPU-powered graphics acceleration
  • High-quality 64-bit internal processing
  • Double-click text entry of parameter values
  • Large and compact interface sizes
  • Stereo and mono plug-ins available
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Extensive help file with interactive help hints
Pro-G Gate/Expander Plug-In
FabFilter Pro-G is a highly flexible gate/expander plug-in with advanced side chain options and precise metering.
  • Six meticulously tuned expander/gate algorithms, including upward expansion and ducking
  • Program dependent attack and release curves
  • Low CPU usage
  • Adjustable range, hold time and knee settings
  • Optional look-ahead time up to 10 ms
  • Precise and helpful metering, including a real-time level display
  • Expert mode that offers highly customizable side chain options
  • Mono, stereo or mid/side processing
  • Up to four times linear-phase oversampling
  • Zero-latency operation mode
  • MIDI triggering: open the gate/expander with your MIDI keyboard
  • External side chain option
  • Separate dry/wet level settings
  • Easy to set up for common gating / expansion scenarios with the included factory presets
  • GPU-powered graphics acceleration
  • Double-click text entry of parameter values
  • Stereo and mono plug-ins available
  • Supports common Pro Tools hardware control surfaces
  • MIDI Learn
  • Undo/redo and A/B comparison
  • Smart Parameter Interpolation
  • Extensive help file with interactive help hints
Saturn Saturation and Distortion Plug-In
FabFilter Saturn is a multiband distortion, saturation and amp modelling plug-in, with lots of modulation options.
  • Sixteen different distortion styles, from subtle saturation to heavy guitar amps and bit crushing
  • Multiband processing (up to 6 bands)
  • Per-band drive, mix, feedback, dynamics, tone and level controls
  • Per-band solo and mute options
  • Optional HQ mode (8x oversampling)
  • Mid/side processing
  • Interactive multiband display
  • Easy-to-use interface, using our innovative what-you-use-is-what-you-see concept
  • Endless modulation options, with all the 16-step XLFOs, XY controllers, envelope generators, envelope followers and MIDI sources you will ever need
  • GPU-powered graphics acceleration
  • Normal and wide interface layouts, with an option to show or hide the modulation section at the bottom
  • Easy drag-and-drop modulation with 50-slot modulation matrix
  • Over 150 presets
  • Modulation source signal visualization
  • Interactive MIDI Learn
  • Unique per-component presets
  • Smart Parameter Interpolation
  • Extensive help file with interactive help hints
  • Undo, redo and A/B switch features
Timeless 2 Delay Plug-In
FabFilter Timeless 2 is an ultra-flexible tape delay plug-in with time stretching, top quality filters and drag-and-drop modulation.
  • Two delay lines (5 ms to 5 sec) with host tempo sync and panning
  • Feedback, cross-feedback and phase inversion
  • Tape delay or time-stretching behavior when changing the delay time
  • Mid/side processing
  • Freeze buffer option
  • Over 300 presets
  • Tap feature
  • Two state-of-the-art multimode filters with filter panning and 11 characteristics
  • Interactive filter display
  • Revolutionary interface, using our innovative what-you-use-is-what-you-see concept
  • GPU-powered graphics acceleration
  • Normal and wide interface layouts, with an option to show or hide the modulation section at the bottom
  • Endless modulation options, with all the 16-step XLFOs, XY controllers, envelope generators, envelope followers and MIDI sources you will ever need
  • Easy drag-and-drop modulation with 24-slot modulation matrix
  • Modulation source signal visualization
  • Interactive MIDI Learn
  • Unique per-component presets
  • Smart Parameter Interpolation
  • Extensive help file with interactive help hints
  • Undo, redo and A/B switch features
Volcano 2 Filter Plug-In
FabFilter Volcano 2 is a versatile filter effect plug-in with state-of-the-art filter technology and endless modulation possibilities.
  • Four state-of-the-art multi-mode filters, with panning, delay and more than 10 unique characteristics
  • Ultra-flexible filter routing, including per-channel and mid/side modes
  • Revolutionary new interface, using our innovative what-you-use-is-what-you-see concept
  • Normal and wide interface layouts, with an option to show or hide the modulation section at the bottom
  • Endless modulation options, with all the 16-step XLFOs, envelope generators, envelope followers and MIDI sources you will ever need
  • Easy drag-and-drop modulation with 24-slot modulation matrix
  • Large interactive filter display
  • GPU-powered graphics acceleration
  • Modulation source signal visualization
  • Stereo and mono plug-ins available
  • Mid/side processing
  • Side chain input
  • Highly improved MIDI Learn
  • Almost 300 presets
  • Unique per-component presets
  • Undo, redo and A/B switch features
  • Extensive help file with interactive help hints
Twin 2 Synthesizer Plug-In
FabFilter Twin 2 is a powerful synthesizer plug-in with the best possible sound quality and an ultra-flexible drag-and-drop modulation system.
  • Three high-quality oscillators with PWM, hard sync, and phase sync
  • Four state-of-the-art multimode filters with filter panning and 11 characteristics
  • Extensive delay section with feedback and filter section
  • Over 1600 presets
  • Ring modulation
  • Revolutionary new interface, using our innovative what-you-use-is-what-you-see concept
  • Normal and wide interface layouts, with an option to show or hide the modulation section at the bottom
  • Endless modulation options, with all the 16-step XLFOs, XY controllers, envelope generators, envelope followers and MIDI sources you will ever need
  • Easy drag-and-drop modulation with 50-slot modulation matrix
  • Modulation source signal visualization
  • GPU-powered graphics acceleration
  • Side chain input
  • Polyphonic portamento
  • 32-voice polyphony and unison
  • Highly improved MIDI Learn
  • Unique per-component presets
  • Smart Parameter Interpolation
  • Extensive help file with interactive help hints
  • Undo, redo and A/B switch features
One Simple Synthesizer Plug-In
FabFilter One is a basic synthesizer plug-in with just one oscillator, but with perfectly fine-tuned controls and the best possible sound and filter quality.
  • Aliasing-free high quality oscillator with triangle, sawtooth, and square wave forms
  • Fat and ultra-smooth self-oscillating low-pass filter
  • LFO with tempo sync, triangle and square wave forms, and adjustable wave balance
  • Fine-tuned EG with additional Hold setting
  • Frequency and filter cut-off modulation
  • Pulse width modulation
  • Filter keyboard tracking
  • Velocity sensitivity
  • 10-voice polyphony
  • White/pink noise generator
  • Smooth portamento
  • Over 100 presets
  • Undo and redo
  • MIDI learn
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Parameter value display
  • Extensive help file
Simplon Simple Filter Plug-In
FabFilter Simplon is a basic and easy to use filter plug-in with two high-quality multi-mode filters and an interactive filter display.
  • Two state-of-the-art multimode filters
  • Three different filter characteristics per filter
  • Lowpass, highpass, and bandpass filters
  • 12/24/48 dB/octave
  • Serial and parallel filtering modes
  • Large interactive filter display
  • Large controls for flawless live performances
  • Undo and redo
  • MIDI Learn
  • Preset browser
  • Smart Parameter Interpolation
  • Sample-accurate automation of all parameters
  • Interactive help hints
  • Extensive help file
Micro Basic Filter Plug-In
FabFilter Micro is the ultimate lightweight filter plug-in with a single high-quality filter including envelope follower modulation
  • Includes the classic, analog-sounding filter from FabFilter One
  • Low-pass and high-pass settings
  • Envelope follower modulating the cut-off frequency
  • Modern interface with large interactive filter display
  • Input and output gain settings to control saturation
  • Includes basic factory presets to get started right away
  • Stereo and mono plug-ins available
  • MIDI Learn
  • Undo/redo
  • Smart Parameter Interpolation
  • Sample-accurate automation
  • Full help file with interactive help hints
Plug-In Formats All FabFilter plug-ins are available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only).
Requirements Windows
64-bit: Windows 10, 8, 7 or Vista
32-bit: Windows 10, 8, 7, Vista or XP
VST 2/3 host or Pro Tools

Mac OS X
OS X 10.6 or higher
AU or VST 2/3 host or Pro Tools
Intel processor
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw