Auckland  09 414 0477
Wellington  04 801 9494
03216

Audient ASP880 8 Channel Mic Pre & ADC

Audient ASP880 8 Channel Mic Pre & ADC
larger imageMove mouse over the image to magnify
NZ $1,999.13
Excl GST
Qty.

Key Features

  • 8 x Class-A Audient Console Mic Preamplifiers
  • High Performance Burr Brown AD Converters
  • Variable Input Impedance
  • Variable High Pass Filters
  • 2 x Discrete JFET Instrument Inputs
  • 8 x Insert points (between the mic preamps and AD converters)
  • Digital Outputs - ADAT, AES & S/PDIF
  • All-Metal Enclosure
ASP880 is an 8-channel microphone preamplifier & ADC that will transform your sessions into world class recordings, the perfect addition to your set-up. ASP880 provides eight of Audient's renowned console mic pres, pristine converter technology and a versatile feature set that includes Variable Impedance and Variable High Pass Filters. All in a 1RU rack!

AUDIENT CONSOLE MIC PRES
The professional sound you deserve.

We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you’re in the studio with an Audient console or on the road with ASP880, you’re always guaranteed the same world class Audient sound.

PRISTINE CONVERTER TECHNOLOGY
Brilliance on the inside enables brilliance on the outside.

ASP880 provides you with the highest grade converters from Burr Brown, the leaders in converter technology. The integral ADC guarantees you will have the best conversion possible. This isn't just the best converter in a mic pre either, it stands up against dedicated converters too. Focus on the music and let ASP880 take care of the rest.

EXPAND
Grows with your needs.

Transform your sessions into world class recordings with ASP880, the perfect addition to your set-up. Bypass the mic pres and converters in your current interface and achieve the same audio excellence as the top studios.

VARIABLE HIGH PASS FILTER
Quickly remove unwanted low frequencies

Get it right at the source and lose those unwanted low frequencies with a simple to use variable high-pass filter.  Take control of low end rumble, reduce proximity effect and more by quickly sweeping anywhere between 25Hz and 250Hz. The result is a clean, ready to record signal.

VARIABLE IMPEDENCE
Get the best from your microphones

If you’re partial to the character of ribbon mics, then ASP880 is made for you. Variable impedance allows you to match the pre to your favourite ribbon mic. Retain the punch and frequency response the mic was born with. It also works on your other mics, just more subtly.

PLUG AND PLAY
Plug in and be inspired.

As well as offering you 8 channels of Audient mic pre, ASP880 has two harmonically rich JFET D.I inputs. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly.

BUILT TO LAST
Quality deserves protection.

ASP880 has been designed to last, its all-metal construction and hand milled aluminium knobs will stand up to countless late nights in the studio and days on the road. All this in 1RU!
MICROPHONE PREAMPLIFIERS:
(measured to insert send)
MIC GAIN: -10 to +60dB (-10dB Pad)
LINE GAIN: -16 to +44dB (-10dB Pad)*
PHANTOM POWER: 48v +/-4v @ 10mA/Channel
MIC EIN: <-127.5dBu
CMRR: >80dB @ 100 to 10kHz
MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad)
INPUT IMPEDANCE: Mic LO: 220Ω BalancedMic MED: 1k2Ω BalancedMic HI: 2k8Ω BalancedLine (All Z): >6kΩ Balanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to 100kHz
CROSSTALK: <-85dBu @ 1kHz & 10kHz
THD+N @ 0dBu (1kHz): 0.003% (-90.5dBu)
SNR: >90dB
HPF: Sweepable from 25Hz to 250 Hz, 2nd Order (12dB/Octave)
XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
* Line input level at the combi jacks will be affected by the input impedance switch position, this can be used as a second pad control to adjust line input ranges on all channels.
DISCRETE JFET D.I (Channels 1 & 2):
(measured to line outputs / insert send)
D.I GAIN: -10 to +60 dB (-10dB Pad)
MAXIMUM INPUT LEVEL: +16dBu (typical), +22dBu
INPUT IMPEDANCE: 1MegΩ Unbalanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to 50kHz
THD+N @ 0dBu (1kHz): <0.03% (-70dBu)
SNR: 89dB
1/4” JACK: TIP (Hot) & SLEEVE (Shield)
LINE OUTPUTS (Insert Sends):
MAXIMUM OUTPUT LEVEL: +27.5dBu
OUTPUT IMPEDANCE: <100Ω Balanced
ADC LINE INPUTS (Insert Returns):
(measured at optical output under AES-17)
MAXIMUM INPUT LEVEL: +18dBu
DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
INPUT IMPEDANCE: >10kΩ Balanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to Fs/2
CROSSTALK: <-80dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94dB)
THD+N @ -6dBFS (1kHz): <0.002% (-94dB)
DYNAMIC RANGE: 113dB un-weighted
115dB A-weighted
PEAK LED LINEUP: +16dBu (-2dBFS)
SIGNAL LED LINEUP: Variable Brightness from -30dBu to -10dBu (-28dBFS)
DIGITAL i/o:
ADAT 8 CHANNELS SMUX: 44.1 - 96kHz
AES | S/PDIF 8 CHANNELS: 44.1 - 96kHz
CLOCK Internal or External
WORLDCLOCK INPUT 75Ω BNC
Optional 75Ω Termination
POWER SUPPLY:
  • High stability, low noise internal SMPS
  • Fanless, quiet operation
  • Works anywhere in the world without reconfiguring
LINE VOLTAGES: 90 to 264V (a.c)
INTERNAL RAILS: +/-18VDC, +48VDC & +5VDC
FUSE: T1A (1Amp Time Delay)
CONSUMPTION: Maximum 40 Watts
WEIGHT:
4.0kg
Quick information for the ASP880's main features and technology.

HPF & Impedance
ADAT
Converters
JFET DI
Mic Pres
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw