Auckland  09 414 0477
Wellington  04 801 9494
03042

Shure KSM32/CG Embossed Single-Diaphragm Microphone

Shure KSM32/CG Embossed Single-Diaphragm Microphone
larger imageMove mouse over the image to magnify
Embossed single-diaphragm, side-address microphone for highly critical studio and live sound productions.
Enquire

Key Features:

  • Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range.
  • Embossed, high-compliance diaphragm provides extended low-frequency response.
  • Ultra-thin, gold-layered, low-mass, Mylar® diaphragm for excellent transient response
  • 15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
  • Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect.
  • Integrated three-stage pop protection grille reduces "pop" and other breath noise
  • Internal shock mount reduces transmission of handling noise
  • Replacement cartridge:  RK374 
An embossed single-diaphragm, side-address, cardioid condenser microphone for highly critical studio recording and live sound productions. The Shure KSM32 offers an extended frequency response for an open, natural sounding reproduction of the original sound source. 


Performance Characteristics

  • Extended frequency response
  • Very low self-noise
  • Exceptional low-frequency reproduction
  • High output level
  • High input SPL capability
  • No cross-over distortion
  • Extremely uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference


Applications

Some typical applications for the KSM32 are listed below. Microphone use, however, is a matter of personal taste. The KSM32 may be used for a variety of applications other than those listed. 

  • Voice -- solo, background, voice-over, broadcasting
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums 

Both the acoustic environment and microphone placement have significant effects on the sound obtained when miking a source. You may need to experiment with these variables to achieve the best overall sound for each application. 

Type Permanently-biased Condenser
Polar Pattern Cardioid
Frequency Response 20 to 20,000 Hz
Phantom Power Required? 48 Vdc +/- 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw