Auckland  09 414 0477
Wellington  04 801 9494
65665

Lewitt DGT 450 Professional USB Microphone

Lewitt DGT 450 Professional USB Microphone
larger imageMove mouse over the image to magnify
Feature-rich iOS // OS X // Windows USB microphone with Lightning Connector.
Enquire

Key Features

  • Condenser
  • Cardioid
  • Low-Cut & Attenuation
  • Digital
Nothing less than all you need
The LEWITT DGT 450 is a professional USB recording solution for PC, Mac and iOS devices. 24 bit / 96 kHz, 93 dB dynamic range, pre-attenuation and low-cut filter lay the foundations for best-in-class recordings. Featuring asynchronous USB transfer, support for OS X Core Audio and ASIO for Windows, and the option to cross-fade between zero-latency direct and tape return monitoring, it is the ideal all-in-one piece of equipment for recording vocals, instruments and live acts, and as your go-to podcast and YouTube microphone working directly on your iPhone, iPad or iPod, to name just a few possibilities.

Perfect for podcasts, gaming and home studio recording
Whenever you need high-resolution audio, the DGT 450 is the ideal solution for professional USB recording. Featuring the same capsule used in our highly acclaimed studio line, the DGT 450 guarantees distortion-free and crystal-clear sound. A built-in headphone amp, direct monitoring functionality, low-cut filter, and pre-attenuation round off this comprehensive USB solution.

Vocal recording: Unmatched quality – anyplace, anytime
Pure condenser sound captures your voice in studio quality. Perfect for traditional vocal recording, voice over, podcast and streaming, you name it.

Zero-latency monitoring
Professional recording demands proper monitoring functionality. Blend between zero-latency direct and playback monitoring. This is essential to avoid latency problems using your mobile device.

Powerful headphone amp: Never run out of headroom
With our powerful headphone amp you can easily drive any set of studio headphones so that you will hear every signal loud and clear during production.

Low-cut and attenuation: Adapt to every situation
Low-cut: linear, 80 Hz 
Attenuation: 0 dB, -10 dB

Control Center software
The Control Center – available for PC and Mac – allows remote control of all parameters from your host device

Supreme technology
24 bit / 96 kHz high-end AD/DA converter
93 dB dynamic range
118 dB SPL max
Powerful built-in powerful headphone amp
2 low-cut settings
2 pre-attenuation settings
Asynchronous USB transfer
Micro-USB-powered
Microphone
Acoustical operating principle Pressure gradient transducer, permanently polarized
Transducer Ø 17 mm, 0.67 in
Polar pattern Cardioid
Frequency range 50 ... 20.000 Hz
Dynamic range 93 dB (A)
Pre-attenuation pad  0 dB
-10 dB
Low-cut filter linear
80 Hz (12 dB/oct)
Front to back ratio at 1kHz ≥ 15 dB (A)
Sensitivity at 1 kHz - 24 dBFS
Analog gain range 0 ... 44 dB
Equivalent noise level 25 dB (A)
Max. SPL for 0.5 % THD 118 dBSPL, 0 dB pre-attenuation
General
Resolution 24 Bit
Sample rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Recording modes Cardioid/Cardioid + Line-in
Supply voltage (DGT) on iOS additional 5V/500mA, micro-USB power supply required
Connector USB to 18-pin lockable hi-speed connector
Line-in
Input impedance > 1 Meg Ω
Full scale input voltage (0 dB gain) 0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
Input dynamic range ≥ 96 dB (A)
Frequency response 20 ... 20.000 Hz
Operating principle Mono line input
Analog gain range 0 ... 12 dB
Headphones
Headphone output power 20 mW at 16 Ω, THD+N < 0,5%
16 mW at 32 Ω, THD+N < 0,5%
Frequency response 20 ... 20.000 Hz
Headphone volume control - 60 dB ... 0 dB
  • DGT 40 Tri
  • DGT 50 USB
  • DGT 50 Li
  • DTP 40 Mts
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw