Auckland  09 414 0477
Wellington  04 801 9494
03662

ATI DDA416/WC106 Clock Distribution Amplifier

ATI DDA416/WC106 Clock Distribution Amplifier
larger imageMove mouse over the image to magnify
QUAD 1X4 AES/EBU DDA & 1X6 CLOCK DISTRIBUTION AMPLIFIER WITH ROUTABLE AUDIO
NZ $5,548.00
Excl GST
Qty.
The ATI Model DDA416/WC106 is an integrated package containing four 1X4 AES/EBU Digital Audio Distribution Amplifiers and one 1X6 Clock Distribution Amplifier. Operation of the unit is simple and straightforward, and it is housed in a rugged 2U rack mount enclosure. All audio connections are made directly to the unit’s built-in XLR and BNC connectors, and no special breakout cables are required.
 
Signal routing is provided via rear panel accessible DIP switches to provide exceptional versatility. The front panel provides full status monitoring of all input signals, including displays for Input Sample Rate, Word Length, Digital Errors and Pro/Consumer mode. A unique Source Monitor & Control function allows front panel setup for input termination and input equalization. Input Fault displays are also provided, as is switchable Re-clocking on all AES/EBU inputs.
 
The DDA’s Clock Distribution Amplifier has both Input and Loop-thru outputs to allow downstream equipment to be fed from the input reference signal. When no downstream equipment is connected, the inputs should be terminated via the front panel Input Termination switch. Loop-through inputs are also provided for AES Sync sources.
 
Summary alarm LEDs indicate faults occurring on any input, regardless of the position of the Source Monitor selector.
 
A front panel lock switch protects all settings. The DDA retains all of its settings, even if power is removed.
• Accepts AES3 and AES11 Word Clock inputs
• Independent Quad 1X4 AES/EBU Distribution
  Amplifiers
• Displays input sample rates of 32, 44.1, 48, 88.2, 96,
  176.4 and 192 kHz
• Full diagnostics for all inputs and operating conditions
• Loop-thru inputs for AES Sync and Word Clock
• Switchable input termination, individual for all inputs
• 6 isolated 75 Ohm BNC Word Clock outputs
• 16 isolated AES/EBU 110 Ohm XLR outputs
• Flexible signal routing system
• Switchable Input Re-clocking on all AES/EBU inputs
• Automatic Input Equalization for long input lines
• Front panel control locking system
• Quiet, internal linear power supply
• Attractive and rugged 2RU package
• No breakout cables required
INPUTS
 
CONNECTORS
XLR female for AES/EBU and AES Sync BNC for Word Clock 
 
LEVEL
XLR 200mVp-p minimum; BNC 100mVp-p minimu
 
IMPEDANCE 
Transformer isolated, balanced and floating, XLR 110O, BNC 75O; input terminations may be switched in or out via front panel control 
 
SAMPLE RATES
30kHz to 200kHz 
 
OUTPUTS
 
AES/EBU OUT CONNECTORS
16 x XLR male LEVEL 5 Vp-p loaded at 110O 
 
IMPEDANCE 
110O 
 
CLOCK OUT CONNECTORS
6 x BNC 
     
LEVEL
2Vp-p loaded 
 
IMPEDANCE 
75O, unbalanced 
 
LOOP-THRU 
XLR-M and BNC 
 
OUTPUT JITTER
<300 picoseconds 
 
PROPAGATION DELAY
<25 nanoseconds 
 
INDICATORS
 
INPUT FAULT
AES 1, AES 2, AES 3, AES 4, AES External Sync, Word Clock
 
INPUT TERMINATION
Terminated or Off
 
INPUT SAMPLE RATE
32, 44.1, 48. 88.2, 96, 176.4 or 192 kHz 
 
WORD LENGTH 
16 Bits, 18 Bits, 20 Bits, 24 Bits 
 
DIGITAL ERRORS 
Bi-Phase Parity, Validity, Non-Linear PCM, DTS-CD Signal 
 
INPUT RE-CLOCKING
On and Off MODE Pro and Consumer 
 
INPUT EQ
Locked and Enabled 
 
SOURCE MONITOR & CONTROL 
AES 1, AES 2, AES 3, AES 4, AES External Sync, Word Clock 
 
POWER
Internal Supply, 115/230VAC ±10%, 50/60Hz, 10VA, IEC320 3 pin connector 
 
SIZE
19” W x 3.5“H x 8.5”D; 9 lbs. 
 
WARRANTY
Limited, One Year Warranty
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw