Auckland  09 414 0477
Wellington  04 801 9494
03473

RME Fireface 802 - USB & FireWire Audio Interface

RME Fireface 802 - USB & FireWire Audio Interface
larger imageMove mouse over the image to magnify
60-Channel High-end 192 kHz USB/FireWire audio interface.
NZ $2,816.00
Excl GST
Qty.

The SteadyClock jitter suppression technology ensures high quality sound from input to output. Should an external clock source fail, the Intelligent Clock Control (ICC) will retain the last valid input sample rate. All of the Fireface 802's hardware and software are fully compatible with Windows and Mac operating systems.

Driven by two DSP chips, the TotalMix FX software offers a complete digital mixer and signal router with integrated EQ, dynamics and reverb/echo. The software's built-in monitor controller allows for any physical output to be assigned as main or phones output. Talkback, listenback, mono, dim, recall and external inputs will work automatically on the assigned monitor control channels. The 802 also offers 6 memory slots for permanently saving different TotalMix configurations, which may be recalled without a computer. The TotalMix FX app for iPad allows for complete control over all functions without a computer connection. The Fireface 802 ships with driver CD, USB cable, IEC power cable, and optical cable.

  • 24 Bit / 192 kHz Operation
  • Reference Class AD/DA Conversion
  • 4 Professional Quality Preamps
  • 60 Channels Available Simultaneously
  • TotalMix Software with Dedicated DSP
  • USB and FireWire Computer Connection
  • SteadyClock Jitter Suppression
  • Standalone Operation with Setup Recall
  • Mac and Windows Compatibility
  • iPad Compatibility
  • 30 Input / 30 Output channels
  • 12 x Analog I/O
  • 4 x Mic/Instrument preamps
  • 1 x AES/EBU I/O
  • 2 x ADAT I/O
  • 1 x SPIDIF (Available through ADAT 2 port)
  • 1 x Word Clock I/O
  • 1 x MIDI I/O
  • FireWire or USB operation
  • TotalMix FX software with monitor management
  • SteadyClock jitter suppression
  • Intelligent Clock Control (ICC) retains sample rate in case of external clock failure
  • DigiCheck software offers comprehensive tools for metering, testing, measuring and analyzing audio streams
  • Stand alone operation with setup recall
  • Universal power supply ensures worldwide compatibility
Converters 24-bit
Sample Rates 44.1, 48, 88.2, 96, 176.4 and 192 kHz
Analog Inputs 4 x XLR/TRS combi mic/line (front panel)
8 x 1/4" TRS (rear panel)
Analog Outputs 8 x 1/4" TRS (rear panel)
2 x 1/4" TRS headphone (front panel)
AES/EBU 1 x XLR AES/EBU input (supports AES Single-Wire 192 kHz)
1 x XLR AES/EBU output (supports AES Single-Wire 192 kHz)
ADAT 2 x TOSLink ADAT optical input (ADAT 2 functions as 2-channel optical S/PDIF mode)
2 x TOSLink ADAT optical output (ADAT 2 functions as 2-channel optical S/PDIF mode)
Standard: 2 x 8 channels 24 bit, up to 48 kHz
Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz
Word Clock I/O 1 x BNC wordclock input
1 x BNC wordclock output
Switchable Termination: 75 Ω
MIDI In/Out 1 x MIDI in
1 x MIDI out
Frequency Response Line and Microphone Inputs
Frequency Response @ 44.1 kHz, -0.1 dB: 5 Hz to 20.8 kHz
Frequency Response @ 96 kHz, -0.5 dB: 5 Hz to 45.8 kHz
Frequency Response @ 192 kHz, -1 dB: 5 Hz to 92 kHz
Instrument Input
Frequency Response @ 44.1 kHz, -0.5 dB: 5 Hz to 20.8 kHz
Frequency Response @ 96 kHz, -0.5 dB: 5 Hz to 35 kHz
Frequency Response @ 192 kHz, -1 dB: 5 Hz to 55 kHz
Line Output
Frequency Response @ 44.1 kHz, -0.5 dB: 5 Hz to 20.8 kHz
Frequency Response @ 96 kHz, -0.5 dB: 5 Hz to 45 kHz
Frequency Response @ 192 kHz, -1 dB: 5 Hz to 89 kHz
THD Inputs
THD: < -110 dB, < 0.00032 %
THD+N: < -104 dB, < 0.00063 %
Outputs
THD: -104 dB, < 0.00032 %
THD+N: -100 dB, < 0.00063 %
Channel Separation Channel Separation: > 110 dB
Microphone Inputs Input Impedance: 3.4 kΩ
Signal to Noise Ratio (SNR): 112 dB RMS unweighted, 116 dBA
Gain Range: 54 dB
Maximum Input Level, Gain +6 dB: +10 dBu
Instrument Input Input Impedance: 800 kΩ
Signal to Noise Ratio (SNR): 112 dB RMS unweighted, 115 dBA
Maximum Input Level, Gain +6 dB: +21 dBu
Line Inputs Signal to Noise Ratio (SNR): 113 dB RMS unweighted, 116 dBA
Input Sensitivity: 8 kΩ unbalanced, 12 kΩ balanced
Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
Input Level for 0 dBFS @ Lo Gain: +19 dBu
Input Level for 0 dBFS @ +4 dBu: +13 dBu
Line Outputs Dynamic Range (DR): 115 dB RMS unweighted, 118 dBA
Output Impedance: 75 Ω
Output level switchable Hi Gain, +4 dBu, -10 dBV
Output Level at 0 dBFS @ Hi Gain: +19 dBu
Output Level at 0 dBFS @ +4 dBu: +13 dBu
Output Level at 0 dBFS @ -10 dBV: +2 dBV
Headphone Outputs Maximum Output Level at 0 dBFS, High: +16.8 dBu
Maximum Output Level at 0 dBFS, Low: +2 dBV
Output Impedance: 30 Ω
System Requirements Windows XP SP2 or higher
Intel Mac OS X 10.6 or higher
1 x OHCI compatible FireWire Port 400 (1394a), FireWire 800 (1394b) via cable adapter
or
1 x USB 2.0 port
For USB: Computer with at least Pentium Core 2 Duo CPU
Driver Support Windows 8 / 7 / Vista / XP SP2 (32 & 64 bit)
Apple Mac OS X 10.6 or up (Core Audio)
Windows and Mac OS X drivers are completely identical in terms of features and functionality, as far as this is possible on the respective platform.
Some features in DIGICheck are not available in the Mac version.
Computer Connections 1 x USB 2.0
1 x Firewire 400
1 x Firewire 800
Power Supply Internal Switching PSU: 100 - 240 VAC, 30 W
Power Consumption (typical): 22 W
Rackmount 1U
Dimensions (WxDxH) 19.0 x 1.7 x 9.5" / 48.3 x 4.4 x 24.1 cm
Weight 6.6 lb / 3 kg
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw