Auckland  09 414 0477
Wellington  04 801 9494
04802

Focusrite RedNet HD32R - Redundant 32-channel HD Bridge

Focusrite RedNet HD32R - Redundant 32-channel HD Bridge
larger imageMove mouse over the image to magnify
32-Channel Bridge between Dante Networks and Pro Tools|HD.
Enquire

Key Features

  • Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX 
  • Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
  • Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
  • Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
  • Permits multiple workstations to access the same interface hardware and I/O 
  • No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
  • Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
  • Additional Avid/Digidesign interfaces may be connected to expansion ports
  • Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions
RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports. HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. The HD32R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.

Studio quality sound meets digital audio networking…
RedNet is Focusrite’s flagship range of modular Ethernet-networked audio interfaces that harnesses the power of Audinate’s tried and tested Dante digital audio networking system to bring studio quality sound to any modern audio application.

Designed with multiple audio applications in mind – from Live Sound rigs to Multi-room Recording Studios, Houses of Worship, Audio Distribution Installations, Post Production environments and anything in-between – fundamentally RedNet is an extremely scalable, near zero latency audio distribution system that can be used to expand I/O channel count, interface digital components, and/or bridge between Pro Tools|HD or MADI and the Dante audio network.

Incorporating Focusrite’s most advanced AD/DA conversion to date, rock-stable JetPLL clocking and premium multi-layered board circuitry, RedNet is no exception to the company’s philosophy that ‘Sound is Everything’. With every design detail meticulously engineered, RedNet is a step above its I/O competition, providing some of the most transparent and pristine audio quality available – with the added benefit of the systems’ revolutionary networking capabilities.

Sonic Excellence – Advanced A-D/D-A conversion, premium multi-layered board circuitry and rock steady JetPLL™clocking delivers extremely clean, transparent audio at a dynamic range of 119dB with 24-bit resolution at sample rates up to 192kHz.

Dante Audio Networking – Harnessing the power of Dante’s tried and tested digital audio networking system, RedNet forms an extremely scalable, modular audio distribution system that is compatible with any other Dante enabled products.

Highly Expandable – RedNet’s modular “building block” design means that each system can be specified with any combination of RedNet units to ensure your system has the right type and quantity of I/O exactly where you need them.

Extensive Compatibility – With many different options for interfacing with other hardware, whether it's MADI, AES 3, analogue, Mac, PC, Pro Tools|HD, or Dante-based products - RedNet will function with a huge range of devices and features multiple connectivity options.
Digital Performance
Supported Sample Rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master.
External Word Clock Range Nominal sample rate ±7.5%
Rear Panel Connectivity
Pro Tools|HD
Primary Port 1 x Mini DigiLink
Expansion Port 1 x Mini DigiLink
Loop Sync
Word Clock Input 1 x BNC 75Ω port
Word Clock Output 1 x BNC 75Ω port
Word Clock
Word Clock Input 1 x BNC 75Ω port (switchable termination)
Word Clock Output 1 x BNC 75Ω port
PSU & Network Connections
PSU 2 x IEC Inputs with retaining clips.
Network 2 x etherCON connectors, also compatible with standard RJ45 connectors.
Front Panel Indicators
Primary PSU (A) Green LED. Illuminates when an AC input is applied and all DC outputs are present.
Primary PSU (B) Green LED. Illuminates when an AC input is applied and all DC outputs are present.
Primary Network Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate.
Secondary Network Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode.
Network Locked Green LED. When unit is network slave, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected.
Sample Rate Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.
Pull Up/Down Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.
Signal Indicators 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.
Clock Source Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master.
Network Modes
Redundant Allows unit to connect two independent networks.
Switched Connects both ports to integrated network switch allowing daisy-chaining of device.
Dimensions
Height 44.5mm/ 1.75"
Width 482.6mm/ 19"
Depth 263mm/ 10.35"
Weight
Weight 3.9kg
Power
PSU 2 x Internal, 100-240V, 50/60Hz, consumption 30VA.
0

Signup For Our Newsletter

Subscribe for the latest product news, special offers and invitations.

Give Us Your Feedback

We would love to hear what you think of our website and your experiences with our company. Drop us a line here.

Contact Us 

Auckland: 09 414 0477
Wellington: 04 801 9494

Australia: 1300 472 344

fbtw