|
|
A-Designs Audio |
 |
| |
| High-End Analogue Sound Equipment |
|
 |
| HM2EQ Hammer |
HM2 COMPRESSOR “NAIL" |
| Dual Mono Three Band Tube EQ Vacuum-tube design hybrid |
- 2 Hard Pass Switches
- Two (2) High Cut Switches
- Two (2) Low Cuts Switches
- Two (2) Mono Three Band EQ Sections
- Milled Aluminum Face Plate
- Blue Jewel Lamp (Power Indicator)
- Two (2) XLR Input Connectors
- Two (2) XLR Output Connectors
|
- Two (2) U-Rack Space
- Two (2) 12AT7 Tubes
- Clean and airy high end
- Warmth, transparency, and quality sound.
- Toroid Power Transformer
- Metal Casing
- Milled Aluminum Knobs
- Heavy Duty Carling Toggle Power Switch
|
|
| Endless possibilities in the control of compression and shaping the envelope |
- Solid State/Tube Design
- Custom Milled Aluminum
- Knobs
- Custom Milled Aluminum Face Plate
- Dual Rack Mount
- Balanced XLR Outputs
- Threshold
- Hard Threshold
- Filter to 250HZ
- Attack
|
- Release
- Gain
- Mix
- LED Indicators switchable to Stereo
- Gain Reduction Switch for meters
- Carling Toggle Power Switch
- Red Jewel Power Indicator
- In/Out Switch
- Dual Channel
|
|
 |
 |
| MP-2A
|
EM-EQ2 |
| Stereo Tube Microphone Preamplifier |
- Vacuum-tube design
- Two (2) Level Volume Controls
- Two (2) Polarity Switches
- Two (2) Tone Switches
- Two (2) Phantom Switch
- Two (2) Backlit True VU Meters
- Red Jewel Lamp On/Off
- Two (2) Neutrik Combo XLR 1/4" Input Connectors
- Two (2) XLR Output Connectors
|
- Zero Feedback Loop
- Two (2) U-Rack Space
- Two (2) CineMag Input Transformers
- Two (2) Custom Wound Output Transformers
- Two (2) 6NI-P Tubes
- Two (2) EF86 Tubes
- Clean and airy high end
- Warmth, transparency, and quality sound.
|
|
Well-suited for tracking, mixing and even mastering applications, the EM-EQ2 is a dual-mono equalizer housed in a rugged, all-metal 2U chassis. Sonically nodding to the classic Pultec EQP-1A sound, the EM-EQ2 utilizes the same discrete Class AB amplifier found in A-Designs’ popular solid-state EM-PEQ and Pacifica mic pres, putting a slightly unique twist on the classic filter design of yesteryear. That aside, the EM-EQ2 faithfully preserves the EQ section design, control layout and wonderfully smooth musicality of the original Pultec unit.
Additional features include a nickel core output transformer, Wima caps, and a true hard bypass. Instead of using common off-the-shelf chokes, A-Designs uses a custom-wound tapped inductor wound to the same values as the 500 Series EM-PEQ. Fully balanced, noise-free performance with modern impedance specs make for intuitive operation and quick studio integration. |
|
 |
| JM-3001 |
Pacifica |
Equally ideal for both studio recording and live sound use, the JM-3001 from A-Designs Audio is a versatile preamplifier, equalizer and instrument input housed in a single-rack-space frame.
Hand-built in the US, the new A-Designs device features three inputs – microphone, instrument and EQ/insert – which may be used together or independently. The product is also equipped with a highly musical three-band parametric EQ and high/low filters, as well as two independent transformer balanced outputs (microphone and EQ). |
| Solid State Stereo Microphone Preamplifier |
• Solid State Design
• Custom Input Transformers
• Custom Output Transformers
• Single Rack Space
• Balanced XLR Input
• Balanced XLR Output
• Level Controls
• -20dB Pad Switch
|
• 48v Switch
• Phase Switch
• Blue LED Power Indicator
• ON/OFF Switch
• Toroid Power Transformer
• 72dB Gain
• Hi Z ¼” Inch Input for Direct Inject.
• Red LED Phantom Indicator |
|
 |
|
| EM-PEQ & P-1 |
New 500 Series module sonically nods to the classic Pultec EQP-1A sound.
The classic all-tube Pultec EQP-1A goes down on the record books as one of the most venerated equalizers of all time, cherished by recording and mastering engineers for its almost mythical ability to improve the sound of just about anything running through it. Finally, after much research and development, A-Designs Audio announces that it has managed to capture much of the essence of the famed EQ in a new product – and one that fits in a compact 500 Series module frame size, no less!
A Designs Audio is proud to introduce a new line of microphone pre-amplifiers for the 500 Series. These Pre-amplifiers are original designs stemming from our inspiration of the “Quad Eight Sound”. Each has its own unique character. Depending on which microphone you use, you will be able to open a world of color and sound to inspire you and your recordings.
The P-1, is a 500 Series Format with the mojo of our highly successful Pacifica.
The A Designs “EM Series” is a twist on the P-1. Each color has its own sound. This was accomplished by using different custom wound output and input transformers. |
For $NZ Pricing and further assistance please
contact Protel
at our Auckland or Wellington offices.
|
|
|
